Influence of TiC on Microstructure, Mechanical and Wear Properties of Magnesium alloy (AZ91D) Matrix Composites

Abstract

This paper deals with the wear and mechanical (tensile, compressive, and microhardness) properties of Mg/TiC composites over magnesium alloy (AZ91D). Magnesium based metal matrix (AZ91D) composites were synthesized by using TiC particles varying wt % from 0% to 20% with a step of 5% by stir casting. The mechanical properties shows there is significant improvement of ultimate tensile strength (UTS) & % elongation, compressive strength, and microhardness with % increase of TiC content in Mg alloy. The fracture mechanism of the tensile and compressive specimen was investigated by Scanning Electron Microscope (SEM). A Pin-on-Disk (POD) tribotester was used to determine the wear rate (WR) and specific wear rate (SWR) of the composites. The test was carried out in a dry sliding condition of varying load of 10N, 30N and 50 N corresponding to a constant sliding distance & sliding speed of 1000 m and 1 m/s respectively and the worn surface of the pin is examined by SEM after the test.